lv_micropython/ports/esp32/boards/deploy.md

Program your board using the esptool.py program, found [here](https://github.com/espressif/esptool).

If you are putting MicroPython on your board for the first time then you should
first erase the entire flash using:

```bash
esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash
```

From then on program the firmware starting at address 0x1000:

```bash
esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x1000 esp32-20190125-v1.10.bin
```
ports: Add board.json for all boards. This will be used by https://micropython.org/download/ to generate the full listing of boards and firmware files. Optionally supports a board.md for additional customisation of the download page, as well as deploy.md for flashing instructions. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2021-09-02 00:08:30 +10:00			`Program your board using the esptool.py program, found [here](https://github.com/espressif/esptool).`
esp32: Add specific deploy_s2.md instructions for esp32-s2. In particular the UM S2 boards (and update the features list). Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2021-10-27 14:56:59 +11:00
ports: Add board.json for all boards. This will be used by https://micropython.org/download/ to generate the full listing of boards and firmware files. Optionally supports a board.md for additional customisation of the download page, as well as deploy.md for flashing instructions. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2021-09-02 00:08:30 +10:00			`If you are putting MicroPython on your board for the first time then you should`
			`first erase the entire flash using:`

			```bash
			`esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash`
			```

			`From then on program the firmware starting at address 0x1000:`

			```bash
			`esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x1000 esp32-20190125-v1.10.bin`
			```