From ee92198c8aa7c58c0adfb0a0a54f285a61bf6167 Mon Sep 17 00:00:00 2001
From: Matt Trentini <matt.trentini@gmail.com>
Date: Wed, 1 May 2024 10:29:07 +1000
Subject: [PATCH] esp32/boards/M5STACK_NANOC6: Add new M5Stack C6 board
 definition.

Signed-off-by: Matt Trentini <matt.trentini@gmail.com>
---
 ports/esp32/boards/M5STACK_NANOC6/board.json  | 21 +++++++++++++++++++
 .../boards/M5STACK_NANOC6/deploy_nanoc6.md    | 18 ++++++++++++++++
 .../boards/M5STACK_NANOC6/mpconfigboard.cmake |  7 +++++++
 .../boards/M5STACK_NANOC6/mpconfigboard.h     |  8 +++++++
 ports/esp32/boards/M5STACK_NANOC6/pins.csv    |  7 +++++++
 5 files changed, 61 insertions(+)
 create mode 100644 ports/esp32/boards/M5STACK_NANOC6/board.json
 create mode 100644 ports/esp32/boards/M5STACK_NANOC6/deploy_nanoc6.md
 create mode 100644 ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.cmake
 create mode 100644 ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.h
 create mode 100644 ports/esp32/boards/M5STACK_NANOC6/pins.csv

diff --git a/ports/esp32/boards/M5STACK_NANOC6/board.json b/ports/esp32/boards/M5STACK_NANOC6/board.json
new file mode 100644
index 000000000..15654341b
--- /dev/null
+++ b/ports/esp32/boards/M5STACK_NANOC6/board.json
@@ -0,0 +1,21 @@
+{
+    "deploy": [
+        "deploy_nanoc6.md"
+    ],
+    "docs": "",
+    "features": [
+        "BLE",
+        "WiFi",
+        "RGB LED",
+        "USB",
+        "USB-C",
+        "JST-PH"
+    ],
+    "images": [
+        "m5stack_nanoc6.jpg"
+    ],
+    "mcu": "esp32c6",
+    "product": "M5Stack NanoC6",
+    "url": "https://shop.m5stack.com/products/m5stack-nanoc6-dev-kit",
+    "vendor": "M5Stack"
+}
diff --git a/ports/esp32/boards/M5STACK_NANOC6/deploy_nanoc6.md b/ports/esp32/boards/M5STACK_NANOC6/deploy_nanoc6.md
new file mode 100644
index 000000000..d8c212c5d
--- /dev/null
+++ b/ports/esp32/boards/M5STACK_NANOC6/deploy_nanoc6.md
@@ -0,0 +1,18 @@
+Program your board using the esptool.py program, found
+[here](https://github.com/espressif/esptool).
+
+To put the NanoC6 into 'update mode', hold the button while connecting the USB
+cable. It can be released after the connection is made.
+
+If you are putting MicroPython on your board for the first time then you should
+first erase the entire flash using:
+
+```bash
+esptool.py --chip esp32c6 --port /dev/ttyUSB0 erase_flash
+```
+
+From then on program the firmware starting at address 0x0:
+
+```bash
+esptool.py --chip esp32c6 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x0 M5STACK_NANOC6-20240602-v1.24.0.bin
+```
diff --git a/ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.cmake b/ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.cmake
new file mode 100644
index 000000000..4393130b6
--- /dev/null
+++ b/ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.cmake
@@ -0,0 +1,7 @@
+set(IDF_TARGET esp32c6)
+
+set(SDKCONFIG_DEFAULTS
+    boards/sdkconfig.base
+    ${SDKCONFIG_IDF_VERSION_SPECIFIC}
+    boards/sdkconfig.ble
+)
diff --git a/ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.h b/ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.h
new file mode 100644
index 000000000..9acab7096
--- /dev/null
+++ b/ports/esp32/boards/M5STACK_NANOC6/mpconfigboard.h
@@ -0,0 +1,8 @@
+#define MICROPY_HW_BOARD_NAME    "M5Stack NanoC6"
+#define MICROPY_HW_MCU_NAME      "ESP32C6"
+
+#define MICROPY_HW_ENABLE_SDCARD (0)
+#define MICROPY_PY_MACHINE_I2S   (0)
+
+#define MICROPY_HW_I2C0_SCL      (1)
+#define MICROPY_HW_I2C0_SDA      (2)
diff --git a/ports/esp32/boards/M5STACK_NANOC6/pins.csv b/ports/esp32/boards/M5STACK_NANOC6/pins.csv
new file mode 100644
index 000000000..f04cfb4db
--- /dev/null
+++ b/ports/esp32/boards/M5STACK_NANOC6/pins.csv
@@ -0,0 +1,7 @@
+G1,GPIO1
+G2,GPIO2
+IR_LED,GPIO3
+LED_BLUE,GPIO7
+BUTTON,GPIO9
+NEOPIXEL_POWER,GPIO19
+NEOPIXEL,GPIO20