The limit is set by a `MICROPY_PY_MACHINE_FREQ_NUM_ARGS_MAX` define, which
defaults to 1 and is set for stm32 to 4.
For stm32 this fixes a regression introduced in commit
e1ec6af654b1c5c4a973b6c6b029ee68bb92eb89 where the maximum number of
arguments was changed from 4 to 1.
Signed-off-by: robert-hh <robert@hammelrath.com>
Use new function mp_obj_new_str_from_cstr() where appropriate. It
simplifies the code, and makes it smaller too.
Signed-off-by: Jon Foster <jon@jon-foster.co.uk>
Enable support for cipher suites like
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, as suggested in
https://github.com/micropython/micropython/issues/14204#issuecomment-2024366349
and https://github.com/micropython/micropython/issues/10485#issuecomment-1396426824
Tests have been run on the top 500 domains from moz.com. Without this
patch, 155 out of 500 fail to connect because of TLS issues. This patch
fixes them all. And it seems all existing mbedtls flags are needed to get
good coverage of those top 500 domains.
The `ssl_poll.py` test has the cipher bits increased from 512 to 1024 in
its test key/cert so that it can work with ECDHE-RSA which is now the
chosen cipher.
Signed-off-by: Sylvain Zimmer <sylvain@sylvainzimmer.com>
Signed-off-by: Damien George <damien@micropython.org>
Allows passing in a callback to `TaskQueue()` that is called when something
is pushed on to the queue.
Signed-off-by: Damien George <damien@micropython.org>
This makes the code a bit simpler to understand for the three cases of
timeout behaviour (-1, 0, non-zero), and eliminates a dependency on the
(slow) `mp_hal_delay_ms(100)` call.
Signed-off-by: Damien George <damien@micropython.org>
If the socket timeout is 0 then a failed socket.connect() raises
EINPROGRESS (which is what the lwIP bindings already did), but if the
socket timeout is non-zero then a failed socket.connect() should raise
ETIMEDOUT. The latter is fixed in this commit.
A test is added for these timeout cases.
Signed-off-by: Damien George <damien@micropython.org>
This implements network.ipconfig() and network.WLAN.ipconfig() when the
ninaw10 driver is used for WLAN.
Due to a omission in the ninaw10 driver stack, setting the DNS address has
no effect. But the interface is kept here just in case it's fixed
eventually.
dhcp4 and has_dhcp4 are dummy arguments. Ninaw10 seems to always use DHCP.
Signed-off-by: robert-hh <robert@hammelrath.com>
Eventually this needs to be made a generic call to the underlying VFS. But
for now this prevents `disk_ioctl()` crashing on non-FAT filesystems.
Signed-off-by: Damien George <damien@micropython.org>
This adds support to use the Nagle algorithm implemented already in lwIP to
determine when TCP data should be sent.
As currently written, MicroPython will only create packets if there is <25%
remaining in the send buffer. Using it, sending a small message of ~50
bytes will not trigger output of the message on the network. So it will
remained queued until the TCP interval timer expires, which can be up to
500ms.
Using Nagle's algorithm, the first write, no matter how small, will
generate a packet on the network. And sending lots of data still makes
efficient use of the link.
In addition to this, an application designer may choose to always create
packets for every write by setting the TCP_NODELAY socket option. That's
also implemented in this commit.
The W5100 and W5100S only have 4 available sockets and 16kB of socket
buffer. Allocating 16kB to either the receive or transmit buffer of a
single socket is not allowed, so the current setup does not change the
allocation for socket 0 from the reset default. ctlwizchip is returning -1
to indicate the error, but the response isn't being inspected and probably
doesn't need to be.
Signed-off-by: Jared Hancock <jared@greezybacon.me>
Use the existing metal log handling mechanism instead of overriding the
metal_log, which causes build issues when logging is enabled.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Supporting `verify_mode` and `CERT_NONE` is required for the new `ssl.py`
code, as well as `requests` to work.
Signed-off-by: Damien George <damien@micropython.org>
Other constants such as `machine.Pin.OUT` are defined on the class that
uses them, rather than at the module level. This commit makes that the
case for WLAN network interfaces, adding IF_xxx and SEC_xxx constants.
The SEC_xxx constants are named as such to match the `security` keyword
that they are used with. And the IF_xxx constants have IF as a prefix so
they are grouped together as names.
This scheme of putting constants on the class means that only the available
features (eg security configurations) are made available as constants. It
also means that different network interfaces (eg WLAN vs LAN) can keep
their own specific constants within their class, such as PHY_xxx for LAN.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
According to the datasheet, the IEN bit to enable the interrupt is in the
MR2 register, not the MR register.
This is just cleanup as the interrupt appears to be enabled by default
after resetting the chip.
Tested on W5100S_EVB_PICO.
This commit implements a new <AbstractNIC>.ipconfig() function for the NIC
classes that use lwIP, to set and retrieve network configuration for a NIC.
Currently this method supports:
- ipconfig("addr4"): obtain a tuple (addr, netmask) of the currently
configured ipv4 address
- ipconfig("addr6"): obtain a list of tuples (addr, state,
prefered_lifetime, valid_lifetime) of all currently active ipv6
addresses; this includes static, slaac and link-local addresses
- ipconfig("has_dhcp4"): whether ipv4 dhcp has supplied an address
- ipconfig("has_autoconf6"): if there is a valid, non-static ipv6 address
- ipconfig(addr4="1.2.3.4/24"): to set the ipv4 address and netmask
- ipconfig(addr6="2a01::2"): to set a static ipv6 address; note that this
does not configure an interface route, as this does not seem supported by
lwIP
- ipconfig(autoconf6=True): to enable ipv6 network configuration with slaac
- ipconfig(gw4="1.2.3.1"): to set the ipv4 gateway
- ipconfig(dhcp4=True): enable ipv4 dhcp; this sets ipv4 address, netmask,
gateway and a dns server
- ipconfig(dhcp4=False): stops dhcp, releases the ip, and clears the
configured ipv4 address.
- ipconfig(dhcp6=True): enable stateless dhcpv6 to obtain a dns server
There is also a new global configuration function network.ipconfig() that
supports the following:
- network.ipconfig(dns="2a01::2"): set the primary dns server (can be a
ipv4 or ipv6 address)
- network.ipconfig(prefer=6): to prefer ipv6 addresses to be returned as
dns responses (falling back to ipv4 if the host does not have an ipv6
address); note that this does not flush the dns cache, so if a host is
already in the dns cache with its v4 address, subsequent lookups will
return that address even if prefer=6 is set
This interface replaces NIC.ifconfig() completely, and ifconfig() should be
marked as deprecated and removed in a future version.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
This provides a MicroPython-specific berkeley-db configuration in
extmod/berkeley-db/berkeley_db_config_port.h, and cleans up the include
path for this library.
Fixes issue #13092.
Signed-off-by: Damien George <damien@micropython.org>
When an exception is handled and the stream is closed, but while this
happens, another exception occurs or dupterm is deactivated for another
reason, the initial deactivation crashes, because its dupterm is removed.
Co-authored-by: Damien George <damien@micropython.org>
Signed-off-by: Felix Dörre <felix@dogcraft.de>
RemoteProc provides an API to load firmware and control remote processors.
Note: port-specific operations must be implemented to support this class.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This module implements OpenAMP's basic initialization and shared resources
support, and provides support for OpenAMP's RPMsg component, by providing
an `endpoint` type (a logical connection on top of RPMsg channel) which can
be used to communicate with the remote core.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Add a MicroPython platform for libmetal, based on the generic platform.
The MicroPython platform uses common mp_hal_xxx functions and allows ports
to customize default configurations for libmetal.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This new machine-module driver provides a "USBDevice" singleton object and
a shim TinyUSB "runtime" driver that delegates the descriptors and all of
the TinyUSB callbacks to Python functions. This allows writing arbitrary
USB devices in pure Python. It's also possible to have a base built-in
USB device implemented in C (eg CDC, or CDC+MSC) and a Python USB device
added on top of that.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
`BLE().config(addr_mode=...)` is not safe to call if the NimBLE stack is
not yet active (because it tries to acquire mutexes which should be
initialized first).
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Disabled by default, but enabled on all boards that previously had
`MICROPY_PY_MACHINE_BARE_METAL_FUNCS` enabled.
Signed-off-by: Damien George <damien@micropython.org>
If no security mode is provided, use WPA for station and WEP for AP. Note
only WEP is supported in AP mode.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Activate the NIC on calls to connect() or config() if it's not already
active. This change makes the NINA NIC more in line with CYW43 and other
NICs, which allow configuring the NIC before or after it is activated.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
The legacy I2S "shim" is removed and replaced by the new I2S driver. The
new driver fixes a bug where mono audio plays only in one channel.
Application code size is reduced by 2672 bytes with this change. Tested on
ESP32, ESP32+spiram, ESP32-S3 using example code from
https://github.com/miketeachman/micropython-i2s-examples
Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a433d6253a61cb0f987835fbc06b2de. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This sets the BLE key distribution parameters at runtime. This isn't
needed in most ports since we already set the default values in
`extmod/nimble/syscfg/syscfg.h`; however in the ESP32 port that
headerfile is not used, and the default values in the ESP-IDF don't
enable key distribution nor can we change those defaults via
`sdkconfig`. Thus we're setting these values explicitly at runtime.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
This moves the runtime initialisation of `ble_hs_cfg` to happen after
`nimble_port_init()`. That is consistent with the order used in NimBLE
examples. On the ESP32 port this is needed because the ESP-IDF sets up
the default RAM secret store callbacks in its implementation of
`nimble_port_init()` (specifically, it calls `esp_nimble_init()` which
in turn calls `ble_store_ram_init()`). We want to override those with
our own callbacks to implement the `IRQ_[GS]ET_SECRET` events in Python.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Prior to commit 628abf8f25a7705a2810fffe2ca6ae652c532896 which added IPv6
support, binding a socket with
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind(("", PORT))
was possible. But, the empty string is not regarded as a valid IP address
by lwip. This commit adds a special case for the empty IP string,
restoring the previous CPython-compatible behaviour.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
When the websocket closes currently, it does not send a proper
"close"-frame, but rather encodes the 0x8800-sequence inside a binary
packet, which is wrong. The close packet is a different kind of websocket
frame, according to https://www.rfc-editor.org/rfc/rfc6455.
This change resolves an error in Firefox when the websocket closes.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
So this header file can expose declarations for contents of the `machine`
module even if that module is disabled. Other parts of the system -- or
third-party code -- may need these declarations, for example when a single
component like MICROPY_PY_MACHINE_UART is enabled with MICROPY_PY_MACHINE
disabled.
Signed-off-by: Damien George <damien@micropython.org>
With this commit, if file open fails, the object will have fd = -1 (closed)
and the finaliser will not attempt to close anything.
Fixes issue #13672.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Following b6a977848407a4ced45d118cf926bd915cc89dfb, to properly calculate
the size of the variable-length allocation.
Signed-off-by: Damien George <damien@micropython.org>
With these changes IPv6 works on the rp2 port (and possibly others that use
the lwIP socket implementation).
Things that have been tested and work:
- Neighbour solicitation for v6 link local address.
- Ping of v6 link-local address.
- Receiving a SLAAC address via router advertisement.
- Ping a v6 address allocated via SLAAC.
- Perform an outgoing connection to a routed v6-address (via default
gateway).
- Create a listening IPv6 wildcard socked bound to ::, and trying to access
it via link-local, SLAAC, and IPv4 (to ensure the dual-stack binding
works).
Things that could be improved:
- socket.socket().getaddrinfo only returns the v4 address. It could also
return v6 addresses (getaddrinfo is actively programmed to only return a
single address, and this is the v4-address by default, with fallback to
the v6 address if both are enabled).
Signed-off-by: Felix Dörre <felix@dogcraft.de>
