lwIP was recently updated in a89ac9e24a566e45bd3ffa7ef9e61e1d994616ea
to STABLE-2_2_0_RELEASE, and this introduced a change in the configuration
variable `DHCP_DOES_ARP_CHECK`, renaming it to `LWIP_DHCP_DOES_ACD_CHECK`.
This commit fixes the ports lwIP settings to use the new configuration
option.
Without this option, connecting to a WiFi access-point takes about 12.5
seconds. With this option (ie disabling DHCP ARP checks) connecting takes
about 4 seconds.
Tested on an RPI_PICO_W and PYBD_SF2.
Signed-off-by: Damien George <damien@micropython.org>
Most ports using TinyUSB now schedule the USB tasks from the USB interrupt.
This commit updates the renesas-ra port to use this new pattern.
Signed-off-by: Andrew Leech <andrew@alelec.net>
The renesas-ra port board definitions contain auto-generated files which
are not easy to understand for someone unfamiliar with the port. This
commit adds some notes to the README to assist other developers who want to
work on these.
The configuration.xml file for the `ARDUINO_PORTENTA_C33` was provided by
@iabdalkader.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Allowing to define the trigger UART.IRQ_RXIDLE as well as UART.IRQ_RX. The
delay for the IRQ_RXIDLE interrupt is about 3 character times or 1-2 ms,
whichever is larger.
The irq.flags() value is changed only with an expected event. Do not
change it otherwise.
Signed-off-by: robert-hh <robert@hammelrath.com>
The renesas-ra port supports calling a handler to be called on every byte
received by UART. For consistency with other ports, the symbol IRQ_RX
is added as the trigger name.
Side change: Add the received UART data to the REPL input buffer only if it
is the REPL UART. Otherwise, every UART would act as REPL input.
Signed-off-by: robert-hh <robert@hammelrath.com>
This simplifies configuration by removing the `MICROPY_PY_OS_SEP` option
and instead including `os.sep` if `MICROPY_VFS` is enabled. That matches
the configuration of all existing ports that enabled `os.sep` (they also
had `MICROPY_VFS` enabled), and brings consistency to other ports.
Fixes issue #15116.
Signed-off-by: Damien George <damien@micropython.org>
There are a few TinyUSB CDC functions used for stdio that are currently
replicated across a number of ports. Not surprisingly in a couple of cases
these have started to diverge slightly, with additional features added to
one of them.
This commit consolidates a couple of key shared functions used directly by
TinyUSB based ports, and makes those functions available to all.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Disabled by default, but enabled on all boards that previously had
`MICROPY_PY_MACHINE_BARE_METAL_FUNCS` enabled.
Signed-off-by: Damien George <damien@micropython.org>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a433d6253a61cb0f987835fbc06b2de. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Because `mpthreadport.h` is included by `mpthread.h`.
Also remove unnecessary include of `mpthreadport.h` in esp32's `main.c`.
Signed-off-by: Damien George <damien@micropython.org>
For mimxrt, nrf, renesas-ra, rp2 and samd ports, this commit implements
similar behaviour to the stm32 port, where USB is only brought up after
boot.py completes execution.
Currently this doesn't add any useful functionality (and may break
workflows that depend on USB-CDC being live in boot.py), however it's a
precondition for more usable workflows with USB devices defined in
Python (allows setting up USB interfaces in boot.py before the device
enumerates for the first time).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Changes include:
- Some mbedtls source files renamed or deprecated.
- Our `mbedtls_config.h` files are renamed to `mbedtls_config_port.h`, so
they don't clash with mbedtls's new default configuration file named
`mbedtls_config.h`.
- MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE is deprecated.
- MBEDTLS_HAVE_TIME now requires an `mbedtls_ms_time` function to be
defined but it's only used for TLSv1.3 (currently not enabled in
MicroPython so there is a lazy implementation, i.e. seconds * 1000).
- `tests/multi_net/ssl_data.py` is removed (due to deprecation of
MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE), there are the existing
`ssl_cert_rsa.py` and `sslcontext_server_client.py` tests which do very
similar, simple SSL data transfer.
- Tests now use an EC key by default (they are smaller and faster), and the
RSA key has been regenerated due to the old PKCS encoding used by openssl
rsa command, see
https://stackoverflow.com/questions/40822328/openssl-rsa-key-pem-and-der-conversion-does-not-match
(and `tests/README.md` has been updated accordingly).
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
The standard Arduino pinout uses LEDR/G/B and LED_BUILTIN (if available).
This patch adds aliases to match the standard pinout, while retaining
LED_RED/GREEN/BLUE for compatibility with existing scripts and examples.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Switch the RTC clock source to Sub-clock (XCIN). This board has an
accurate LSE crystal, and it should be used for the RTC clock
source.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Following ad806df857b52e9814dbd857b14f09b63eb847fe where the
MICROPY_PY_PENDSV_ENTER/REENTER/EXIT macro definitions were moved to
mphalport.h.
Signed-off-by: Damien George <damien@micropython.org>
MicroPython code may rely on the return value of sys.stdout.buffer.write()
to reflect the number of bytes actually written. While in most scenarios a
write() operation is successful, there are cases where it fails, leading to
data loss. This problem arises because, currently, write() merely returns
the number of bytes it was supposed to write, without indication of
failure.
One scenario where write() might fail, is where USB is used and the
receiving end doesn't read quickly enough to empty the receive buffer. In
that case, write() on the MicroPython side can timeout, resulting in the
loss of data without any indication, a behavior observed notably in
communication between a Pi Pico as a client and a Linux host using the ACM
driver.
A complex issue arises with mp_hal_stdout_tx_strn() when it involves
multiple outputs, such as USB, dupterm and hardware UART. The challenge is
in handling cases where writing to one output is successful, but another
fails, either fully or partially. This patch implements the following
solution:
mp_hal_stdout_tx_strn() attempts to write len bytes to all of the possible
destinations for that data, and returns the minimum successful write
length.
The implementation of this is complicated by several factors:
- multiple outputs may be enabled or disabled at compiled time
- multiple outputs may be enabled or disabled at runtime
- mp_os_dupterm_tx_strn() is one such output, optionally containing
multiple additional outputs
- each of these outputs may or may not be able to report success
- each of these outputs may or may not be able to report partial writes
As a result, there's no single strategy that fits all ports, necessitating
unique logic for each instance of mp_hal_stdout_tx_strn().
Note that addressing sys.stdout.write() is more complex due to its data
modification process ("cooked" output), and it remains unchanged in this
patch. Developers who are concerned about accurate return values from
write operations should use sys.stdout.buffer.write().
This patch might disrupt some existing code, but it's also expected to
resolve issues, considering that the peculiar return value behavior of
sys.stdout.buffer.write() is not well-documented and likely not widely
known. Therefore, it's improbable that much existing code relies on the
previous behavior.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
All ports using this common configuration already enable time/date
validation, so this commit is a no-op change.
Signed-off-by: Damien George <damien@micropython.org>
Also move MICROPY_PY_PENDSV_ENTER/REENTER/EXIT to mphalport.h, for ports
where these are not already there.
This helps separate the hardware implementation of these macros from the
MicroPython configuration (eg for renesas-ra and stm32, the IRQ static
inline helper functions can now be moved to irq.h).
Signed-off-by: Damien George <damien@micropython.org>
Minor changes for consistency are:
- nrf gains: unique_id(), freq() [they do nothing]
- samd: deepsleep() now resets after calling lightsleep()
- esp32: lightsleep()/deepsleep() no longer take kw arg "sleep", instead
it's positional to match others. also, passing 0 here will now do a 0ms
sleep instead of acting like nothing was passed.
reset_cause() no longer takes any args (before it would just ignore them)
- mimxrt: freq() with an argument and lightsleep() both raise
NotImplementedError
Signed-off-by: Damien George <damien@micropython.org>
And use it in all ports. The ports are unchanged, except esp8266 which now
just returns None from this function instead of the time elapsed (to match
other ports), and qemu-arm which gains this function.
Signed-off-by: Damien George <damien@micropython.org>
This is a code factoring to have the dict for the machine module in one
location, and all the ports use that same dict. The machine.soft_reset()
function implementation is also factored because it's the same for all
ports that did already implement it. Eventually more functions/bindings
can be factored.
All ports remain functionally the same, except:
- cc3200 port: gains soft_reset, mem8, mem16, mem32, Signal; loses POWER_ON
(which was a legacy constant, replaced long ago by PWRON_RESET)
- nrf port: gains Signal
- qemu-arm port: gains soft_reset
- unix port: gains soft_reset
- zephyr port: gains soft_reset, mem8, mem16, mem32
Signed-off-by: Damien George <damien@micropython.org>
If a port defines MICROPY_SOFT_TIMER_TICKS_MS then soft_timer assumes a
SysTick back end, and provides a soft_timer_next variable that sets when
the next call to soft_timer_handler() should occur.
Otherwise, a port should provide soft_timer_get_ms() and
soft_timer_schedule_at_ms() with appropriate semantics (see comments).
Existing users of soft_timer should continue to work as they did.
Signed-off-by: Damien George <damien@micropython.org>
This commit changes the Arduino board identifiers to correspond to their
official names. This helps to identify boards at runtime. At the moment
the Arduino Portenta H7 is reported as PORTENTA which is unfortunate as now
there is another Portenta board (Portenta C33) supported in MicroPython.
Also made the other identifiers for flash and network name consistent,
removed the incorrectly used MICROPY_PY_SYS_PLATFORM identifiers, and added
missing MICROPY_PY_NETWORK_HOSTNAME_DEFAULT identifiers.
Boards affected:
- stm32: ARDUINO_PORTENTA_H7, ARDUINO_GIGA, ARDUINO_NICLA_VISION
- renesas-ra: ARDUINO_PORTENTA_C33
- esp32: ARDUINO_NANO_ESP32
- rp2: ARDUINO_NANO_RP2040_CONNECT
Signed-off-by: Sebastian Romero <s.romero@arduino.cc>
Change the rp2 and renesas-ra ports to use the helper function.
Saves copy-pasta, at the small cost of one more function call in the
firmware (if not using LTO).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings. At this stage only esp32 implements
this class, so the code for the bindings comes from that port.
The documentation is also updated to reflect the esp32's behaviour of
ADCBlock.connect().
Signed-off-by: Damien George <damien@micropython.org>
This removes previously unused functionality to generate pins_ad_const.h,
as well as the unused handling of pin AF in machine_pin.c.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
All ports now use `--board-csv`, `--prefix`, `--output-souce`,
`--output-header` and no longer write to stdout. This matches the esp32
implementation.
Ports that have an AF input use `--af-csv` (to match `--board-csv`).
Any additional output files are now prefixed with `output-` (e.g.
`--output-af-const`).
Default arguments are removed (all makefiles should always specify all
arguments, using default values is likely an error).
Replaced the `af-defs-cmp-strings` and `hdr-obj-decls` args for stm32 with
just `mboot-mode`. Previously they were set on the regular build, now the
logic is reversed so mboot sets it.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
It's not supported on all ports, adds complexity to the build to generate
pins_af.py, and can mostly be replicated just by printing the pin objects.
Remove support for generating pins_af.py from all ports (nrf, stm32,
renesas-ra, mimxrt, rp2).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The output pins.c can be processed for qstrs like any other C file.
Also remove af_const from Makefile (unimplemented in make-pins.py) and fix
target dependency on ad_const.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This prevents each port Makefile from having to add an explicit rule for
`build-BOARD/pins_BOARD.c`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The contents of machine_mem.h, machine_i2c.h and machine_spi.h have been
moved into extmod/modmachine.h.
Signed-off-by: Damien George <damien@micropython.org>
The contents of machine_bitstream.h, machine_pinbase.h, machine_pulse.h and
machine_signal.h have been moved into extmod/modmachine.h.
Signed-off-by: Damien George <damien@micropython.org>
The machine_i2c_type, machine_spi_type and machine_timer_type symbols are
already declared in extmod/modmachine.h and should not be declared anywhere
else.
Also move declarations of machine_pin_type and machine_rtc_type to the
common header in extmod.
Signed-off-by: Damien George <damien@micropython.org>
