The micro:bit board (and probably other boards using the music or display
module) locked up on soft reboot. Reason was a buffer overflow caused by
an index counter, which was not reset on soft_reboot.
That's fixed in this commit. Tested with a micro:bit board, performing a
series of soft reboots.
Signed-off-by: robert-hh <robert@hammelrath.com>
Closes#13178.
TouchPad confirmed working on both chips, and fixes the the ESP32-S3
reading constant max value. Was unable to reproduce the bug on ESP32-S2 but
this may be due to my test setup, and it still works with the fix.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
ESP32 has hardware V1 and S2/S3 has V2, and future chips
may have different versions.
This should still compile to the same binary before and after.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
- Previously the call to esp_wifi_set_channel() would be immediately
overridden by calling esp_wifi_config(...) with the previous channel set.
- AP interface doesn't seem to need more than esp_wifi_config(...) to work.
It will automatically configure 40MHz bandwidth and place the secondary
channel using similar logic to what was being explicitly calculated here.
- However, calling esp_wifi_set_channel() on the STA interface is necessary
if using this interface with ESP-NOW (without connecting to an AP). So
the esp_wifi_set_channel() call is kept in for this purpose. Without
this, tests/multi_espnow/70_channel.py fails.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Because the `ai_canonname` field is subsequently used.
ESP32_GENERIC_S3 (at least) crashes with IDF 5.2.3 without this set.
Signed-off-by: Damien George <damien@micropython.org>
Seemingly ESP-IDF incorrectly marks RTC FAST memory region
as MALLOC_CAP_EXEC on ESP32-S2 when it isn't. This memory is
the lowest priority, so it only is returned if D/IRAM is exhausted.
Apply this workaround to treat the allocation as failed if it gives us
non-executable RAM back, rather than crashing.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The cleanup in 548babf8 relies on some functions not available in older
ESP-IDF. Temporarily restore them, until we drop support for ESP-IDF <5.2.
PWM functionality should end up the same regardless of ESP-IDF version, and
also no different from MicroPython V1.23.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The PIC16 port didn't catch up with the other ports, so it required a bit
of work to make it build with the latest version of XC16.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit fixes PWM configuration across C3, C6, S2 and S3 chips, which
was broken by 6d799378bad4474e77ddb2fa2187ecd6e290e0ba. Without this fix
the PWM frequency is limited to a maximum of 2446Hz (on S2 at least).
Signed-off-by: Andrew Leech <andrew@alelec.net>
Prior to this fix, `tests/extmod/vfs_lfs_mtime.py` would fail when run
after the `tests/ports/rp2/rp2_lightsleep.py` test, because
`time.time_ns()` would have a large and constant offset from `time.time()`.
Fix this by re-syncing the time-ns offset when coming out of lightsleep.
Signed-off-by: Damien George <damien@micropython.org>
The port configuration file tagged callable pointers' LSB on both Arm
and RISC-V variants. This is needed on Arm due to Thumb/Thumb2
code addresses having their LSB set, but on RISC-V this is not required.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This reverts commit c94a3205b044fb27fa703d5c280fb02a094f12e3.
The idea behind this reverted commit was that it allowed to reconfigure the
UART to change only the baudrate, which is important in the context of a
PPP connection where the baudrate may be changed as part of the protocol.
Also, other ports like the rp2 port have this behaviour, where individual
parameters of the UART can be changed with the `.init()` method.
But this commit was no good for a few reasons:
1. It's a subtle breaking change to the UART API, because existing code
that constructs or initialises a UART with just the baudrate would
expect all other parameters to be reset to their defaults. But with
this commit those parameters would remain unchanged.
2. Constructing a UART like `UART(1, 9600)` also hits this code path of
only changing the baudrate and does not reset other parameters, which is
unexpected.
3. It doesn't support setting the baudrate via keyword, eg
`UART.init(baudrate=9600)`.
4. The `timeout_char` field is not updated when changing only the baudrate,
which can lead to unexpected timeouts when reading/writing.
Due to point (4), this commit broke the `tests/ports/stm32/uart.py` test,
the `uart.writechar(1)` has a timeout because the `uart.init(2400)` does
not set the `timeout_char` for the new baudrate.
Points (2)-(4) could be fixed, but point (1) (being a breaking change)
would remain as an issue. So the commit is reverted.
Signed-off-by: Damien George <damien@micropython.org>
Prior to this commit, when flushing a UART on the rp2 port, it returns just
before the last character is sent out the wire.
Fix this by waiting until the BUSY flag is cleared.
This also fixes the behaviour of `UART.txdone()` to return `True` only when
the last byte has gone out.
Updated docs and tests to match. The test now checks that UART TX time is
very close to the expected time (prior, it was just testing that the TX
time was less than the expected time).
Signed-off-by: Damien George <damien@micropython.org>
This fixes a regression introduced in commit
4247921c4ebfced79aa7ccfbb835c9f60ad6f0fc, where this ring-buffer polling
was accidentally put inside the `#if MICROPY_HW_ESP_USB_SERIAL_JTAG`.
Signed-off-by: Andrew Leech <andrew@alelec.net>
Provide stub implementations of localtime_r() and mktime() to avoid
code size increase.
Reported upstream at https://github.com/raspberrypi/pico-sdk/issues/1810
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
NUM_GPIOS amd NUM_EXT_GPIOS are currently hardcoded in make-pins.py, which
makes it difficult to support SoCs with different pin count.
This commit generalises make-pins.py by passing in the pin count in via the
new arguments `--num-gpios` and `--num-ext-gpios`. These default to the
current values supported by Pico, namely 30/10. This can be changed with
PICO_NUM_GPIOS and PICO_NUM_EXT_GPIOS in `mpconfigboard.cmake`.
Signed-off-by: Damien George <damien@micropython.org>
Add support for 32 and 48 pin variants of RP2350.
Add new `PIO.gpio_base()` method, mirroring the Pico SDK.
Signed-off-by: Phil Howard <phil@gadgetoid.com>
Signed-off-by: Damien George <damien@micropython.org>
This commit separates various build settings and include files that are
specific to RP2040 and RP2350, and uses the aon_timer interface instead of
rtc, to work across both MCU variants.
Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Phil Howard <phil@gadgetoid.com>
Two new bits were added to the ctrl register, and existing bits were
shifted, so use DMA_CH0_CTRL_TRIG_xxx constants to generalise the code.
Signed-off-by: Damien George <damien@micropython.org>
This isn't fully working, the CPU often wakes up early. That will be fixed
when a newer version of pico-sdk is released.
Signed-off-by: Damien George <damien@micropython.org>
